Weller WX2 Soldering station supply unit Digital 240 W +50 - +550 °C
The WX 2 soldering station combines design with extremely increased power and an intuitive operating concept. The extremely high efficiency guarantees a very short heat up time and operation of 200 watt tools or alternative 2 x 120 Watt tools. The sturdy and patented control panel of real glass is anti-static as well as resistant to chemical and temperature. It is very easy to operate via a rotary click wheel with confirmation button and finger guide, furthermore there are still 6 sensor buttons. The menu system can be chosen from the following languages: German, English, French, Italian, Spanish, Portuguese and Mandarin.Multitude of connectivity options:The unique tool detection with digital data transmission and insensitivity against interference, allow this plug from WX tool to be fixed single handed and easily by means of lock ring. Furthermore, there are two ports available for the control of soldering fume suction, pre-heating plates and programmable memory controllers (SPS), temperature, speed and status of connected additional devices are indicated on the WX display.A USB port is available for firmware upgrade, configuration and recording via USB Stick as an additional option for connection.Intelligent Tools: Due to the calibration of iron, calibration of the used soldering station is not required All WX tools have a built-in utilization sensor, a separate iron calibration independent of the base station, a handy measurement format in internal memory that transfers the settings from the iron to a separate base station.Optimized, spring-borne sleeve tip with WXP 120:Constant contact pressure due to spring-borne / Anti-Static Soft handle / change of tip without tools.Power saving sleep mode:Automatic standby mode due to utilization sensor in iron handle / No special Stop+Go support required /WXP 120 with blue ring light as a status indicator (light off = off, blinking light = Standby or heating process, light on = iron is ready for use) / Connected devices such as soldering fume suction and pre-heating plates are also be set to power saving mode.