Wachendorff Ethernet Switch 5 Ports - ETHSW50K Industrial Ethernet switch
The ETHSW 50K is a very compact, slim and robust Industrial Ethernet Switch with 5 x 10/100 BaseT(X). Supported 10BaseT, 100BaseTX according to IEEE 802.3u, according to IEEE802.3and Flow Control (Ethernet data flow control) according to IEEE 802.3x. The compact, according to protection class IP30 certified plastic housing, designed for use in harsh and demanding industrial environments, in which large differences in temperature and physical loads must not are unknown.The ETHSW 50K is a unmanaged and plug-and-play-capable switch with a non-blocking/wire-speed Layer 2 switching engine. Due to the design in the operating mode store and forward is a safe transfer. The switchable function flooding Storm Control protects against unwanted assignment of available transfer rate by through broadcast or multicast data frames.The switch has a redundant voltage input and a fault relay for the signaling an error. Thus, in the event of the failure of a power supply unit or the power supply of the interference-free operation and a direct error detection ensuresother. By implementing IEEE 802.3az Energy Efficient Ethernet, the power consumption of the ports present inside in idle state be reduced significantly.This text is machine translated.