Victron Energy Blue-Solar PWM Charge controller PWM 12 V 24 V 5 A
Liquid crystal screenFor status monitoring and for set-upLoad outputOverloading the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads if the battery has been discharged to a specified voltage value. Some loads (especially inverters) can best be connected directly to the battery. The inverter remote control can best be connected to the load output. A special interface cable may be required, please refer to the manual. The voltage values for connecting and disconnecting can be set.Day/night time setting of the load outputThis option allows you to set a certain TIME AFTER sunset. Programmable battery charging algorithm Pre-programd algorithms for AGM, GEL, liquid electrolyte or LiFePO4 batteries (only with integrated BMS)Two 5 V USB outputsMaximum current (both outputs together): 2 A.This text is machine translated.