VOLTCRAFT VC-371 Clamp meter Calibrated to (ISO standards) Digital CAT III 600 V Display (counts): 4000
The thin jaws of this clamp-on ammeter allow individual wires between the cable shaft and the contactor to be gripped much better. The solution for narrow wires in control cabinets.Come in betweenWith the specially shaped, narrow-nosed pliers, closely wired cables in control cabinets can be tapped more easily. Normally, the cable to be measured must be pulled out of the cable duct using the traditionally shaped pliers. Not so with the VOLTCRAFT VC-337. It simply takes hold between adjacent wires.Slotted hole for more flexible workingThe measurement hole has a diameter of 5.5mm. Cables up to 6mm² can be tapped. The pliers offer a very good compromise between the size of the jaw spanner and safety class with appropriate insulation. The pliers can easily be set on an angle. The shape of the opening makes it possible.Fast and efficient tap with cable stopperThe opened pliers have a stop. As a result, cables cannot get too deep into the jaw clamp.Compact and robustThe shock-proof device features a composite enclosure including a protective rubber layer. And the rubber-coating also provides lots of grip.Clamp meter for no-break current readingsThe clamp meter enables non-contact AC and DC readings. The benefit of this method is using the clamp to take current readings without the need to switch off and separate power circuits. This prevents plant downtime.High-contrast 4000 counts displayEasily readable display in all light conditions. This model tops any common clamp meters used in badly lit electrical enclosures. Readings of up to 5999 (6000 counts) are always displayed as 4-digit numbers regardless of where the decimal mark is placed.True RMS readings ensure accuracyTrue RMS measurement enables reading of asymmetrical voltage and amperage with wave forms other than a sinus. Asymmetric voltages are very common in various types of dimmers, speed limiters, synchonised switches, pulse-type chargers, or scale model speed controllers. Which means that in these cases conventional meters displaying average readings are prone to large measurement errors.For quick and easy measuring of DC and AC currents up to 40AUnlike with multimeters, no circuit interruption required. Perfect for servicing on machinery in control cabinets.High-contrast 4000 counts displayEasily readable display in all light conditions. This model tops any common clamp meters used in badly lit electrical enclosures. Readings of up to 5999 (6000 counts) are always displayed as 4-digit numbers regardless of where the decimal mark is placed.True RMS readings ensure accuracyTrue RMS measurement enables reading of asymmetrical voltage and amperage with wave forms other than a sinus. Asymmetric voltages are very common in various types of dimmers, speed limiters, synchonised switches, pulse-type chargers, or scale model speed controllers. Which means that in these cases conventional meters displaying average readings are prone to large measurement errors.Reliable readings thanks to ISO calibrationDiagnostics tools used in an environment that complies with ISO 9001 standards require ISO calibration. Moreover, most safety inspectors as well as accredited testing and certification bodies need to use ISO-certified equipment.This text is machine translated.