Exact measurement values, easy to useWith the handy Voltcraft VC-1113 clamp meter, you can measure up to 200 A non-contact current with a 14.7 mm opening. To measure the current, it is not necessary to open a clamp first to bring the conductor into the measuring position. For a fork version, it is sufficient to insert the conductor. The supplied test leads also allow you to measure voltage, resistance and capacitance as well as continuity testing and diode testing. The True RMS real effective value measurement allows the exact measurement of asymmetrical voltages and currents.All values at a glanceThe LC display has a resolution of up to 6000 counts and is easy to read thanks to its background lighting even in situations with unfavorable light conditions. A built-in torch also brings light to the work surface if required. And if the display is out of sight when measuring in an unfavorable position, the measured value can be frozen with the Hold function and then read off comfortably.Other practical featuresThe Voltcraft VC-1113 has a continuity test with buzzer, and at the top of the current clamp there is also a non-contact voltage detection (NCV) sensor for contact-free detection of alternating voltages in conductors. Battery-friendly: The multimeter switches off automatically after approx. 15 minutes when not in use and a battery warning indicator protects against unexpected failure. The Voltcraft VC-1113 comes in a handy carrying case and comes with two AA batteries.This text is machine translated.