Toolkit RC Scale model battery charger 18 A LiPolymer Li-ion LiFePO LiHV
All-round package for battery, receiver and servoThe charger is the decisive component for a long battery life and thus the long driving and flying pleasure of model-making vehicles. Even careful loading and unloading increases the number of charge cycles by many times. The M8S is a multifunctional charger and discharger with integrated receiver and servo test functions.A toolkit for all casesThe compact Toolkit M8S is not much larger than a smartphone and weighs only 170 g, but is fully functional: It can be used as a charging or measuring device, as a watt meter, signaling device, drone adapter or signal tester. The charging power is 18 A at 400 W, the discharge current is a maximum of 18 A at 400 W in recycle mode and a maximum of 5 A at 20 W in normal operation. The batteries are charged with a high accuracy of ±0.01V and for lithium batteries, the switch-off voltage can be set using the TVC function. The M8S has an ESC power meter with simultaneous output of voltage and throttle signal and also enables measurements of signal values such as PWM/PPM/SBUS with an accuracy of up to 1 microsecond. PWM/PPM/SBUS standard signals can also be output.Practical additional functionsThe multi-charger has several effective features: It automatically detects and charges common drone batteries and has a USB 2.1 A / 5.0 V output, with which the smartphone can be charged or a connection to the PC can be established. This makes it easy to perform firmware upgrades. So that everything remains cool with this multitude of possibilities, the M8S possesses an innovative cooling system, which protects this practical all-rounder from overheating.This text is machine translated.