Toolkit RC Scale model battery charger 15 A LiPolymer LiHV LiFePO Li-ion NiMH Lead-acid calcium
Charge and maintain batteriesFor a long battery life and with it the lasting driving and flying fun of model construction enthusiasts the charger is the ultimate component. Also careful loading and unloading increases the number of charge cycles many times over.Compact and strongThe compact M6D toolkit fits into any backpack and is not only inspired by its innovative design: The two-channel charger weighs only 220 g, but provides amazing charging power at the two built-in XT60 outputs. Two modes can be selected: In asynchronous mode 15 A are present at 250 W, and in synchronous mode even 25 A are present at 500 W. The discharge current is a maximum of 15 A at 250 W in recycle mode and a maximum of 3 A at 12 W in normal operation. Charging the batteries is done with high accuracy and precision, whereby the battery voltage can be manually calibrated. With lithium batteries, the cut-off voltage can be set using the TVC function.All charging processes under controlThe 6.1 cm (2.4) LCD-screen enables a good readability even outdoors thanks to the IPS-technology with optimum light intensity and extra-wide viewing angle. In eight different languages the multitude of data such as battery type, number of cells, charging mode or current charging current can be viewed simultaneously. Charge currents and times, battery type and many other parameters are freely selectable.Practical additional functionsThe M6D toolkit has a number of effective features: It automatically detects and charges common drone batteries, and features a USB 2.1 A / 5.0 V output that allows you to charge your smartphone or connect to your PC. This makes it very easy to perform firmware upgrades.This text is machine translated.