The intelligent radiator fan with up to 22% energy savingSpeedComfort offers radiators more power and accelerates convection. In this way you get more heat from your radiators, the room heats up much faster and a better heat distribution is generated. This makes the thermostat switch off faster and the water temperature of your boiler can be lowered. This saves energy. The Basic Mono Set is the ideal starter kit or extension set, if you have a small standard heating body. The set contains a SpeedComfort, an adapter and an intelligent thermostat sensor, which automatically switches the SpeedComforts on or off. SpeedComfort Starter Set Mono: Smarter radiator amplifier fan for heaters with at least 70 mm platform area for mounting under the radiator. Depending on the length of your radiator or convector, you can attach several SpeedComforts to your heater. In an average-sized living room, you will need about 3 to 5 SpeedComforts. Another SpeedComfort can be connected with the provided connection cable of 30 cm. Operation of the radiator fan: The increased air circulation and improved heat distribution make for a pleasant and even indoor climate in your house about twice as fast, which was more comfortable to live in. The energy-efficient radiator fan improves the air circulation in the room through its fan and thus increases the heating power. This means that you can use your energy supply more efficiently and significantly reduce your heating costs. Install once, then enjoy carefree! The SpeedComforts are automatically switched on and off. This is managed by the smart sensor (which is not visible behind the control panel). Due to the loss-free adapter, the SpeedComforts do not consume any power when switched off. When switched on, they consume hardly any energy: Only 0.55 kWh per SpeedComfort and year. In short, you install SpeedComfort and don't have to pay attention to it anymore.This text is machine translated.