Senseca Needle probe -196 - 500 °C Sensor type Pt100
DX 115 is a high precision, digital, wire wound Pt100 temperature sensor for the PRO D01 / PRO D05 Hand measuring devices.The sensor is factory calibrated and is immediately ready for use. Optionally, it can be equipped with a DAkkS/ACCREDIA calibration certificate.The calibration data is stored in the sensor so that it can be exchanged without recalibration.The digitization electronics integrated in the plug housing minimizes the effects of temperature, Including 4-wire technology and thermal voltage compensation.The user can set the sensor at two points (offset and slope) or by setting R0 (Sensor resistance at 0°C) and adjust the Callendar Van Dusen parameters.Supplied with 1, 2 or 5 m cable with 4-pin M12 connector.This text is machine translated.