Schneider Electric MTN682991 Expansion
Schneider Electric KNX The weather station records and processes analogue sensor signals such as wind speed, brightness, twilight, precipitation as well as a DCF77 signal. Up to four freely combinable analogue sensors and the weather combination sensor/DCF77 can be connected. In conjunction with the 8-way analog input module, there are four analog inputs available, and the connection is made via the subbus. When using the weather station/DCF77 combination sensor, a default setting can be accessed in the software. The measured values are converted by the weather station into 1-byte/2-byte telegrams (EIS 6/5 Value). This allows appropriate bus nodes (visualization software, measurement value displays) to intervene in control processes, generate alarms or control weather-dependent processes. The programming is done via the ETS-Tool for weather station. For mounting on TH35 DIN rail as per EN 60715. The bus connection is via a bus terminal, a data rail is not required. With bus terminal and wire cover. Colour: Light gray.This text is machine translated.