Schneider Electric MTN6705-0008 Blinds actuator
Combi switch blind actuator 8-way, 16 A, REG, SpaceLogic KNX switch blind, 8-way Master 8 switching outputs 4 shutter outputs: The function of blind or switch channels is freely configurable. All shutter switching outputs can be operated manually via button. With integrated bus coupler. For mounting on TH35 DIN rails to EN 60715. The bus is connected via a bus terminal, a data rail is not required. Extension possible with SpaceLogic KNX extensions MTN6805-0008. The Master controls the extensions, their power supply and the communication with the bus. The number of channels can be increased by the cable and tool-free connection of SpaceLogic KNX switch blind extensions. A maximum of 2 extensions can be attached to the Master, so that up to 24 loads can be switched or 12 Blind drives can be controlled. Supply voltage via the Master: KNX bus, approx. 6.5 mA (Master), approx. 9 mA (Master + 1 extension), approx. 12.5 mA (Master + 2 extensions). To extend the KNX installation with SpaceLogic KNX extensions (MTN6805-0008), there is no need for an additional ETS application or Intervention in the KNX topology. General KNX software functions: Energy saving, device safety, device condition, manual operation, PIN code for firmware update. Each channel can be assigned any name in the parameterization to simplify the assignment of group addresses. Functions of the shutter/shutter actuator: -Runtime -Idle time -Step interval -Locking function -Motion range limits -Weather alarm -8-bit-Positioning for height and fins -16 scenes, Status and feedback function per channel. Functions of switching actuator:-operation as opener/closer -programmable behavior for download -Delay functions for each channel -Staircase lightning function with/without manual OFF-function. Off warning for staircase light function -16 scenes per channel, central function, locking function, link or forced guiding, feedback function for each channel. Nominal voltage 250 V AC, 50-60 Hz Rated current: 16 A AC-1, IEC 60947-4-1 / 10 A, IEC 60669-2-5For each roller shutter channel: -Motor load 1000 VAFor each switch output rated load: -Bulbs: 2300 W. Halogen lamps: 2300 W-LED: 200 W -Capacitive load: 10 AX, max. 140 ?F -Inductive load: 10 A, cos? 0.6Relay data -inrush current surge: Max. 800 A/200 ?s, max. 165 A/20 ms. Device width: 4 TE(72 mm) Accessories: SpaceLogic KNX-switch/blind extension MTN6805-0008. To content: With bus terminal.This text is machine translated.