Schneider Electric MTN6513-1202 PMIC - power supply controllers/monitors
KNX power supply 640mA, REGSpaceLogic KNX power supply 640mIntended use of KNX devices with bus voltage supply of devices with DC voltage for mounting on DIN rails TH35 according to EN 60715. The bus is connected via a bus terminal. The SpaceLogic KNX power supply generates the bus voltage for the KNX line. The power supply has two outputs, one KNX output with integrated throttle and one 30 VDC output for additional devices.Two identical power supplies can be connected in parallel to double the output current. The power supply has a potential-free signaling contact for operating and diagnostic messages.Features: -The nominal current can be distributed as required. Reset button for switching off the power supply and resetting the bus devices. Short-circuit proof - non-load - For the operation in plants with emergency power supply. Technical data:Nominal voltage: 220-240 V AC power frequency: 50/60 Hz Power loss: Max. 1.8 WKNX Medium: TP256Bus output voltage: 28-31 V DC SELV output current: 640 mA (all outputs)DC 30 V. Device width: 4 TE (72 mm)To contents: With bus terminal clamp and cable cover.This text is machine translated.