Schneider Electric MTN6502-0105 Expansion
Spacelogic KNX IP interface DIN rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can access the KNX bus from any point on your LAN. The Spacelogic KNX IP Interface can be used as a programming interface for the ETS 5 software and allows access to the KNX bus via the Internet via a VPN. The device supports KNX Security, which can be activated in the ETS. With its interface functionality (tunneling) KNX Security prevents unauthorized access. The device supports up to 8 tunneling channels. A separate individual address must be configured for each tunneling channel. With 2 integrated push buttons for the selection of the tunnel channel and 3 status LEDs. The interface is supplied with power via the KNX bus. An additional power supply is not necessary. For mounting on TH35 DIN rail as per EN 60715. The bus is connected via a bus terminal. The connection to the LAN network is done via the RJ45 jack. Device width - 1 module approx. 18 mm. Note - This application requires ETS 5 or later. Content - With bus terminal and cable cover.This text is machine translated.