Schneider Electric MTN6003-0013 Expansion
Universal dim actuator 1-way with three inputs for installation in a 60 switch box. Potential-free contacts can be connected to the three inputs. Optionally, an NTC temperature sensor can be connected to the third input. The inputs and the KNX are connected via a 6-wire, approx. 30 cm long connecting cable. The connection cable for the inputs can be extended up to a max. of 10 m. KNX Secure compatible. KNX software functions: Dimming actuator functions: Switching and dimming lamps. Switch-on and dimming can be adjusted. Confirmation of the switching status and the brightness value. Soft-ON, soft-OFF and timer. Dim or jump to brightness levels. Time-delayed switch-off, if the switch-off brightness is not reached. Short-circuit and load failure signal 64 scene function. Lock mode via an object with parameterizable brightness value at the start and end of the lock. Behavior of the dimming actuator after bus voltage recovery. Function inputs: Free assignment of the functions switching, dimming, blinds and value generators. Lock object. Behaviour in case of bus voltage recovery. Temperature, brightness, color temperature. Switch: Two switching objects per input. Command with rising/falling edge (ON, OFF, TOGGLE, no response). Dimming: Single and double-sided operation. Time between dimming and switching and dimming step values. Send message frame repetition and stop message frame. Blind: Command with rising edge (none, UP, DOWN, TOGGLE), operating concept (step - move - step or move - step). Time between short and long operation. Blade adjustment time. Value generator and scene ext. Input: Edge (button as normally open contact, button as normally closed contact, switch) and value on flank. Value adjustment via long button actuation for value giver. Scene ext. Unit with storage feature. Logic module: Link, converter, blocking element, comparator, threshold Nominal voltage 230 V AC, 50/60 Hz Connected load 25 °C: Incandescent/halogen lamps: AC 230 V, 20-230 W.NV halogen lamps: 20-210 VA angled Transformer / 20-210 W electrical. LED phase angle control: AC 230 V.20-210W/VA, AC 230 V, 20-230 W. Input power 45 °C: Incandescent/halogen lamps: AC 230 V, 20-210 W. NV halogen lamps: 20-160 VA angled Transformer / 20-160 W electrical. Transformer. LED phase angle control: AC 230 V.20-160 W/VA, AC 230 V, 20-210 W. Inputs: 3. Dimensions: 48 x 50 x 28 (WxHxD). Note: For installation in double electronics box (Kaiser). A minimum distance of 4 mm must be maintained between the 230 V connection and the connection for the KNX/inputs (SELV).This text is machine translated.