Schneider Electric MTN6003-0011 Expansion
Switch actuator 1-way with three binary inputs for installation in a 60-incorporated flush-mounted socket Potential-free contacts can be connected to the three inputs. Optionally, an NTC temperature sensor can be connected to the third input. The inputs and the KNX are connected via a 6-wire, approx. 30 cm long connecting cable. The connection cable for the inputs can be extended up to a max. of 10 m. KNX Secure compatible. KNX software functions: Switching actuator functions: Operation as NC or NO contact. Selection of the basic position in case of bus voltage failure/return. Switch-on and/or switch-off delay. Time control function Switch. Status feedback. Lock function or forced guide. Scene function (64). Feedback object can be inverted. Input functions: Free assignment of the functions switching, dimming, blinds and value generators. Lock object. Behaviour in case of bus voltage recovery. Temperature, brightness, color temperature. Switch: Two switching objects per input. Command with rising/falling edge (ON, OFF, TOGGLE, no response). Dimming: Single and double-sided operation. Time between dimming and switching and dimming step values. Send message frame repetition and stop message frame. Blind: Command with rising edge (none, UP, DOWN, TOGGLE), operating concept (step - move - step or move - step). Time between short and long operation. Blade adjustment time. Trigger and light scene input: Edge (pushbutton as N/O contact, button as NC, switch) and edge value. Value adjustment by long keystroke for valuers. Light scene extension with storage feature. Logic-Module: Linking, converter, blocking element, comparator, limiting value. Rated voltage: AC 230 V. Rated current: 16 A, resistive load. Switching contact: Closer, potential-free relay contact.Nominal power:Bulbs: AC 230 V, max. 2500 W. Halogen lamps: AC 230 V, max. 2500 W. HV LED lamps: AC 140 V, max. 400 W. Ohmic load: AC 16 V, 2500 W. Capacitive load: AC 230 V, 230 A, max.?230 µF.NV halogen lamps: max. 1200 VA wound transformer, max. 1500 W electronic transformers Inputs: 3. Temperature range: -5 °C to 45 °C. Dimensions: 48x50x28 (WxHxD). LV halogen lamps: Max. 1200 VA wound transformer, max. 1500 W electronic transformers. Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum distance of 4mm between the 230V connection and the connection for the KNX inputs (SELV).This text is machine translated.