Schabus GX-C300S Carbon monoxide detector incl built-in sensor mains-powered detects Carbon monoxide
Possible applications:Monitoring of combustion sites in the event of carbon monoxide (CO) leakage and natural gas (CH4) leakageDetection of city, natural and liquid gasesDetection of carbon monoxide (CO)Detection of coolants and refrigerants (optional)TUeV tested safetyCO-sensor, measuring cell, evaluation and software have been subjected to an extensive full test in accordance with DIN EN 50291 at TUV Sued, safety and stability have been certified to the system. The development of the professional CO warning detector GX-C300S was the logical consequence of this.Function description:The professional CO warning detector GX-C300S (the S stands for the external In addition to the internal CO sensor, the sensor also has an input for connecting an external sensor for detecting city and natural gas or for cooling and refrigerant.For the detection of fluorinated hydrocarbons used as refrigerants and refrigerants, please purchase the Sensor GX-CFC Which you can optionally connect instead of the GX-SE sensor.Two relays:The two relays switch independantly of the external sensor in the event of an alarm or fault, a fault detected by the device itself at too high CO concentrations or a gas detected. This system is therefore predestined to monitor the heating and economic area in houses, where the gas valves are located, as well as all systems with an interference signal input in the Building Control Technology. For the sake of simplicity, the designation CH4 on the device and display stands for all of the external Sensor detectable gases, cooling and refrigerant, not only methane, but also butane, propane, ethanol and much moreThis text is machine translated.