Schabus GX-C1pro Carbon monoxide detector mains-powered detects Carbon monoxide
This gas detector is an indispensable safety device in almost every household!Depending on the gas source, observe the correct position height and simply plug the gas detector into the socket. It is immediately ready for use without heating up time.The system will already start at CO gas concentrations that are well below a dangerous level for you. The release delay depends on the limits recommended in DIN EN 50291. Thus, even low CO concentrations that occur over a longer period of time are reliably recorded. You will be warned twice, with an optical and a loud acoustic signal. A test button lights up all 3 LEDs at any time, as well as the piezo tweeter so that you can see that the warning elements are working properly. The built-in self-test of the sensor is carried out automatically every 24 hours. A microcontroller compares the expected with the actual step response and, if in doubt, indicates by the yellow LED that a test with test gas in electrical engineering Schabus is pending at the factory, which is otherwise to be avoided.This text is machine translated.