Schabus 300218 Water leak detector mains-powered
The water detector SHT 218 is a ready-to-plug pump control, which switches on a connected water pump when the sensor height reaches a certain water level and switches it off again after drying the sensor and a specified time. The run-up time of the pump is set from 0 to 100 seconds via a continuously variable adjustment wheel. An optical warning signals the change in water level.If required, you can extend the sensor cable up to 50 m with a cable (2 x 0.14 mm²). You must cut the existing sensor cable and reconnect it to the terminals.Not suitable for fuel oil, diesel, vegetable oil, lubricating oils.This text is machine translated.