Rittal 7320721 CMC III handles
The electromagnetic handles can be connected to the access unit 7320.220 (max. 2 pieces) can be connected. ; The grip takes over the functions of a door locks and a handle lever monitoring. For each handle must be attached to a sensor to the corresponding door access Handle Lever closed, locked automatically integrated in the handle locking mechanism. The release of the handle can be about the CMC-TC system in the network or via the optional additional systems take place, for example, smart card reader (7320.750), magnetic card reader (7320.760), numeric code lock (7320.770) or an individual potential-free switch contact (7320.580).; Voltage-free (without electrical connection) is the handle is locked. The Push Button can be pressed to the electrical activation and then opens automatically the lever. The enclosed profile half cylinder must be installed as a master key or a profile half cylinder, 40 or 45 mm total length, according to DIN 18 254. The opening of the key is always take precedence over, i.e. even with electric locking, as well as in the event of a power failure, it can be opened with the key of the cabinet emergency opening; The Handle contains an identifier so that it automatically from the CMC-TC system detected and is set up. For the; The following components are required to operate the handle:; Processing Unit (7320.100.) Min. SW V1.1 with power supply (e.g. 7320.425); Country-specific connection cable, programming cable; Sensor Unit (7320.220) Min. SW V1.1, connection cable (RJ45, Cat 5); Additional holes in the door (see drawing Installation Instructions); Access sensor (7320.530); ; This text is machine translated.