Right Hotend Assembly Right Hotend Assembly [S]3011018024A01
Replacement hot-end incl. Heating cartridge and temperature sensor (thermistor), suitable for the 3D printer RAISE3D E2, for V3 Brass Nozzle 0.4 mm and V3 Hardened Nozzle. The heater block is marked for the left extruder.Applicability and Compatibility: The RAISE3D E2 Hot End Assembly is compatible with the RAISE3D E2 printer. The thermocouple interface is an easy-to-install terminal that can be plugged directly into the extruder control board.Anti-leak and anti-blockage designThe nozzle of the extruder is seamlessly connected to the neck tube to prevent leaking or clogging of filaments. Heat resistanceThe maximum working temperature is 300°C.Nozzle can be replacedV3 brass nozzle 0.4mm and V3 hardened nozzleThis text is machine translated.