Rhodius 305106 Rhodius FS MINI 10 pieces of fan grinder 15 x 15 x 30 mm grain 120 Topline for stainless steel
Machine suitability: The Rhodius multi-disc grinder FS MINI is designed for use with a straight grinder or a machine with flexible shaft drive with 3 mm shaft support. Material suitability: It has been specially developed for the machining of stainless steel (VA-steel, Inox), e.g. 1.4301 (X5CrNi18-10 or 304) as well as steel (black steel also called structural steel, St37, S235JR, 1.0037 or carbon steel). The Rhodius FS MINI also provides users with excellent results on wood. Construction and production: This Flap-wheel grinder is made by hand! It impresses with its extremely small size and at the same time with a very high number of lamellas. High-performance aluminum oxide is used as a grain. Quality: The excellent Rhodius tool in its category is available to the user by means of the multi-disc grinder FS MINI. Rhodius Topline products stand for the highest level of performance and quality. Application: This quality tool is the first choice if fine deburring and preparatory work must be carried out in places that are particularly difficult to access or if the grinding has to be done cleanly and effectively in particularly narrow corners or curves. The flexible fins ensure an optimum adaptation to the work-piece surface. It also has its strengths on rust-resistant or acid-resistant steel, on Hardox and on high-strength plate. Dimensions: This multi-disc grinder for straight or machine with flexible shaft drive (with high-speed drive) is available in diameters of 10 mm, 15 mm and 20 mm. In order to always achieve an optimum work result and grinding picture, the user can select from the grain sizes 80 and 120. Branches: It is the perfect tool for the various applications and challenges in the car workshop and in the locksmith's shop, in the vehicle construction, in the plant engineering or in the container construction.This text is machine translated.