Rhodius 305080 Burr
Machine suitability: The carbide milling pin HF K can be used with straight grinders, machines with flexible shaft drive and compressed air grinders. The recommended cutting speed is 450-600 m/min for unalloyed steels/cast iron/cast iron, 250-350 m/min for alloyed steels/tool steels/stainless and acid-resistant steels. Construction and production: The head is fitted with a special hard soldering method, the teeth are done with precision diamond discs on the most modern CNC machines. This procedure enables an optimum and powerful cutting geometry. Quality: The HF K gives the user the best Rhodius tool in his category. Rhodius Topline products stand for the highest level of performance and quality. The application: This milling pin in the cross toothing (Z6) variant with chip breaker enables an especially aggressive abrasion and all this at high shelf life and concentricity. In addition, a very high surface quality is achieved. Dimensions: The milling pin with the form K (countersink 90°) according to DIN 8032 is available with the head diameter of 16 mm. The shaft diameter amounts to 6 mm. Note: For this carbide milling pin, special production with shaft lengths up to 400 mm is possible.This text is machine translated.