Rhodius 212087 RS480 PIPELINE Grinding disc Stainless steel Steel 25 pc(s)
Machine suitability: The Rhodius RS480 is a grinding disk (form 27) for angle grinders of all power classes including high frequency machines (HF) and compressed air machines. Material suitability: The Rhodius RS480 was specifically developed for the machining of stainless steel (VA steel, stainless steel), e.g. 1.4301 (X5CrNi18-10 or 304), steel (black steel also called structural steel, St37, S235JR, 1.0037 or carbon steel) and cast steel. The roughing disk RS480 is perfectly suitable for chamfering, for welding seam preparation, for egalising welds in order to plaster or egalize cast parts as well as to break edges and to deburr. Construction and production: The disc is manufactured in accordance with EN 12413 and is safety tested and OSA certified. Every thousand discs are tested for safety at approximately double the speed at which they are used. It contains high-quality and extremely aggressive ceramic grain (sintered corundum) and specially tuned phenolic resin as well as an armoring made from three full-surface glass fiber layers plus an additional smaller flange fabric. This roughing disk thus far exceeds the legally required side load of 290 N. Quality: The user receives the best Rhodius tool in his category with the RS480. Rhodius Topline products stand for the highest level of performance and quality. Application: The RS480 convinces by its very high machining power and aggressiveness with high durability. The glass has a fine grain layer which makes it very easy to break out. Dimension: The RS480 roughing disk has a disc width of 7.0 mm and is available in diameters from 115 mm to 230 mm. Branches: This grinding disk is preferred in the locksmith's shop, in steel construction, in yards, in container and plant engineering as well as in pipe and pipe construction. Note: The Rhodius grinding wheels for stainless steel are iron-free and sulfur-free. To prevent rust, however, you should never change back to stainless steel with the same grinding wheel.This text is machine translated.