Rhodius 208617 RS22 Grinding disc Steel Die-cast 10 pc(s)
Machine suitability: The Rhodius RS22 is a grinding disc (form 27) for angle grinders of all power classes including high frequency machines (HF) and compressed air machines. Material suitability: The Rhodius RS22 has been specifically developed for the machining of steel (black steel also called structural steel, St37, S235JR, 1.0037 or carbon steel) and cast steel. The roughing disk RS22 is excellently suitable for chamfering, for the welding seam preparation, for egalising the welds, in order to brush or to egalize the casting parts as well as to break the edges and for deburring. It is also suitable for surface grinding. Construction and production: The disc is manufactured in accordance with EN 12413 and is safety tested and OSA certified. Every thousand discs are tested for safety at approximately double the speed at which they are used. It contains a high-quality ceramic grain and specially matched Phenolic resin as well as an armoring made of three full-surface glass fiber -fabric layers plus an additional smaller flange fabric. This roughing disk thus far exceeds the legally required side load of 290 N. Quality: The user receives with the RS22 a tool that meets the high demands of quality in industry and trade. To work even more economically, Rhodius grinding discs of the quality line TOP are recommended. Application: The RS22 has an impressive high life. The glass has a fine grain surface layer which makes it very weak. Dimension: The RS22 grinding disc has a disc width of 8.0 mm and is available in diameters of 180 mm and 230 mm. Branches: This grinding disk is preferably used in steel construction as well as in pipe construction.This text is machine translated.