Proto-Pasta CFP12805 Original Carbon Fiber PLA Filament PLA 285 mm 500 g Carbon 1 pc(s)
Protoplant has started a trend with the Original Easy Printing Exotic!Protopasta Carbon Fiber PLA is based on the easy-to-print, high-quality Protoplant PLA. Made from high-quality, dry ingredients and carefully extruded at the Washington plant on the specially built extrusion systems. CFPLA prints are proven to be stiffer with easy processing (often using standard PLA settings) and removal assistance. Excellent layer adhesion and minimal deformation even without a heated bed make it a great exotic for precise parts. Layer layers disappear with the beautiful matt-black finish. Protoplant Carbon also has a slight shine due to the embedded carbon, which was very photogenic!This filament is slightly more abrasive than the standard PLA. Prepare to replace your nozzle and adjust the first layer after prolonged use, or upgrade to a wear-resistant nozzle for less maintenance.Can be used on most PLA-compatible printers such as Lulzbot, Makerbot, Flashforge, Dremel, Ultimaker, Printrbot and many more.In filament form CFPLA is somewhat more brittle than standard PLA and requires special care when handling. The processing is comparable to standard PLA. No heated print bed is required. For smaller nozzles and/or steering machines, the process may be less consistent.We recommend printing with direct drive systems with 0.6 mm nozzles at temperatures from 210 to 230 °C. This text is machine translated.