Pressol PRELIxx PRO 20141 M 10 x 1 FN-schwarz-ZBH-Set 9 14221211 Grease gun
· with hose holder· Filler nipple (FN), M 10 x 1 a (12 670)· Galvanized parts: Hand lever, pull tab, locking pawl, cover· Die-cast zinc grease gun head Z 410· Galvanized ball seat valve (85 589)· Dismanable and movable push rod system· T-handle, grip and press-optimized· ergonomic handle, non-slip, very good power transmission and handling· Grease gun also available in silver, red, blue, green and yellow· Nozzle tube, curved, M 10 x 1, 150 mm (12 635)· Panzer hose, M 10 x 1 a, 11 x 300 mm, with sealing ring (12 655 828)· 2 x mouthpiece, 4 BA, M 10 x 1 (12 643)Special features:· the device processes grease NLGI 3 at 20 °C.· Grease flow at 200 bar counter pressure almost after 40,000 work games unchanged· Pump piston, cylinder and O-ring with 6 μ fitting accuracy (no apparent lubrication)· at high counter pressure, e.g. gummed lubrication point, the lubrication point can be overcome by the short stroke with a considerably lower pressure force· Grease delivery variable from 0.1-1.6 cm³ per stroke· Optimal lever ratios for operating the hand lever, thus the required force for operating the hand lever is as low as possible· Forming grease with a tight fit for loose grease or cartridge· The sleeve can also be inserted if the cartridge is damaged or if the cartridge is not dimensioned, due to the mobility of the connecting rod· Damaged cartridges can easily be removed· Push rod can be locked in any position - connecting rod does not have to Pull all the way back around the grease from the pressure Of the spring (grease does not ice)· due to the easy disassembly, a problem-free cleaning is possible possible· rolled thread on the grease gun tube is insensitive to damage Impact and allows quick and easy screw-in with 1.5 revolutions· Fast venting by half a turn of the grease gun tube· designed for rough use· according to DIN 1283· TUV-certifiedThis text is machine translated.