N/A Brilliant Tools BT651100 Brilliant Tools BT651100
8-piece setFor pulling out and locking the piston rod For shock absorbers with a spring stopWith THE Brilliant TOOLS assembly tool for shock absorbers with traction spring BT651100, McPherson spring struts can be quickly and easily extended to their maximum length and locked for the assembly of a new spring in extended position. The tool is especially suitable for spring legs equipped with strong inner springs (tension springs) that partially pull the piston rod into the damper tube. The tension springs fitted in some shock absorbers (suspension legs) are designed to prevent damage to the spring leg if this âpops upâ while driving. The spring is located directly inside the shock absorber and, if the vehicle stands still on the wheels, it will not be used despite the vehicle's load. The spring is only active if the telescopic leg reaches full expansion during suspension. Otherwise, the use of a tension spring does not have any effect on the normal operation of the telescopic leg. However, there is a significant disadvantage during the disassembly and assembly of the spring leg, since the piston rod reaches into the spring leg after removing the spring load. This makes it difficult to mount a new spring because the telescopic leg does not remain fully extended. The set is suitable for most shock absorbers with traction springs, for example BMW, MB, Toyota, Nissan, Fiat, Peugeot, Ford etc.Delivery scopeIntermediate bearing with telescopic tube recording threadUniversal clamping piece with jaw protectionT-handle hex key with ball headTelescope base unit with handleSet of clamping screwsKnobThis text is machine translated.