Murrelektronik 7999-40041-6380150 Sensor/actuator connector (pre-fab) 150 m No of pins (RJ): 5 100 pc(s)

Additional technical information: Design: 40041Core number/cross-section: 5× 0.75 mm²Drag chain values: 10 MioWire insulation: PP (sw num., gnge)Bending radius (moving): 10× outer-ØTemperature range (flexible): -25...+80 °C.Cable identification 638Cable weight [g/m]: 81.40Material (conductor): Plain copper braidResistance (conductor): Max. 26 Ω/km (20 °C)Single wire Ø (conductor): 0.15 mmConstruction (conductor): 42× 0.15 mm (strand class 6)AWG: Similar AWG 18Material (core insulation): PPWire Ø incl. insulation: 1.85 mm ±5%Wire color/numbering: sw numbered, long-stripedTwisted-strand network: 5 cores stranded around core fillerShielding: no.Chemical resistance: Good resistance to oil, petrol and chemicals (EN 60811-404)Thermal resistance: Flame-resistant according to UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2Test voltage: 2500 V/ACBending radius (fixed): 5× outer-ØNumber of bending cycles (drag chain): Max. 10 Mio (25 °C)Travel path (drag chain): Max. 10 m (horizontal)Travel speed (drag chain): Max. 3 m/s.Acceleration (drag chain): Max. 10 m/s²Dimensioning surge voltage: 1.5 kVLED indicator: no.Locking the slots: Screw thread (M12×1 mm) recommended tightening torque 0.6 Nm, self-lockingMaterial (locking): Die-cast zinc, nickel-platedPollution level 3; Cable colour: Black; Cable diameter: 7.0 mm; Cable length: 1.50 m; Coding: A; Connection side A (sensors/actuators): M12 plug, straight; Connection side B (sensors/actuators): M12 socket, straight; Cross-section (sensor/actuator wiring): 0.75 mm²; IP rating: IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; No. of pins (RJ): 5; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 7.0 mm; Thread type (wiring and installation): M12

Price: EUR 1689.00