Additional technical information: Design: 12341Core number/cross-section: 4à 0.34 mm²Drag chain values: 2 Mio.Wire insulation: PVC (br, ws, bl, sw)Bending radius (moving): 15à outer-ÃTemperature range (flexible): -5...+80 °C.Cable identification 224Cable weight [g/m]: 42.68Material (conductor): Plain copper braidResistance (conductor): Max. 57 â¦/km (20 °C)Single wire à (conductor): 0.1 mmConstruction (conductor): 42à 0.1 mm (strand class 6)AWG: Similar AWG 22Material (wire insulation): PVCWire à incl. insulation: 1.25 mm ±5%Wire color/numbering: br, sw, bl, wsTwisted-strand network: 4 wires strandedShielding: no.Chemical resistance: Good resistance to oil, petrol and chemicalsTest voltage: 2000 V/ACBending radius (fixed): 10à outer-ÃNumber of bending cycles (drag chain): Max. 2 Mio (25 °C)Travel path (drag chain): Max. 5 m (horizontal)Travel speed (drag chain): Max. 3.3 m/s.Acceleration (drag chain): Max. 5 m/s²Locking the slots: Screw thread (M12Ã1 mm) recommended tightening torque 0.6 Nm, self-lockingMaterial (lock): Stainless steel 1.4305 (V2A)Pollution level 3; Cable colour: Grey; Cable diameter: 5.2 mm; Cable length: 10.00 m; Connection side A (sensors/actuators): M12 socket, right angle; Connection side B (sensors/actuators): Cable, open end; Cross-section (sensor/actuator wiring): 0.34 mm²; IP rating: IP66K, IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -30 °C; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 5.2 mm; Thread type (wiring and installation): M12