Additional technical information: Design: 44761Number of wires/cross-section: 2à 2à 0.34 mm²drag chain values: 3 Miowire insulation: PE (ws, ge, bl, or)bending radius (moving): 12à outer ÃTemperature range (moving): -30...+70 °CCable identification: 796Cable weight [g/m]: 69.3Material (conductor): CU-strand, blankresistance (conductor): Max.: Max. 30...+70 ⦠°C insulation: ±C: 5% (wire insulation: à C: 5% (wire insulation: 4 mm): ws, ge, bl, orVerseilverbund: Star quad, 4 wires stranded via central fillerShielding: Yesthermal resistance: Flame resistant according to UL 1581 Section 1060 (FT1), Section 1061 (cable flame), Section 1080 (VW-1) / IEC 60332-1-2bending radius (fixed): 5à Outer-ÃNumber of bending cycles (drag chain): Max. 3 Mio (°C) (25 m) Max. 5 m (horizontal)Travel speed (drag chain): Max. 3.3 m/sAcceleration (drag chain): Max. 2 m/s²Rated surge voltage: 1.0 kVLocking of the slots: Screw thread (M12Ã1 mm) recommended tightening torque 0.6 Nm, self-lockingmaterial (locking): Zinc die-cast, matt nickel-platedPollution degree: 3; Cable colour: Green; Cable diameter: 6.7 mm; Cable length: 3.00 m; Coding: D; Connection side A (sensors/actuators): M12 plug, right angle; Connection side B (sensors/actuators): RJ45 plug; Connector type: Plug, right angle, RJ45 plug enclosure; IP rating: IP67; Jacket material: PUR; Max. temperature: +85 °C; Min. temperature: -25 °C; No. of pins (RJ): 4, 4; Nominal current: 1.5 A; Nominal voltage: 300 V; Outside diameter: 6.7 mm; Sensor/actuator cable features: PUR jacket, D-coded; Thread type (wiring and installation): M12; Thread type connection side: M12 x 1