Image of Murrelektronik 7000-44001-8410500 Sensor/actuator connector (pre-fab) 500 m 1 pc(s)

Murrelektronik 7000-44001-8410500 Sensor/actuator connector (pre-fab) 500 m 1 pc(s)

Additional technical information: Design: 44001Wire number/cross-section: 1× 2× 0.25 mm²Towing chain values: 5 Miowire insulation: PE (rt, gn)Bending radius (moving): 12× Outer ØTemperature range (moving): -20...+60 °CCable identification: 841Cable weight [g/m]: 70.40Material (conductor): CU-strand, blankresistance (conductor): Max. 72 Ω/km (single °wire: 20 Ø C (conductor): 13 mm (conductor): 13 mm (conductor)× cable construction: 0.13 mm (AWG) (AWG) (AWG) (wire:Similar AWG 24material (wire insulation): ZE-PEwire-Ø incl. insulation: 2.55 mm ±5%wire color/numbering: rt, gntwisted pair: 2 wires with 2 fillers strandedshielding: Yeschemical resistance: Good oil, petrol and chemical resistance (VDE 0472 Part 803 Test B)thermal resistance: Flame-resistant according to UL 1581 VW1 / CSA FT1test voltage: 1500 V ACbending radius (fixed): 7.5× external Ønumber of bending cycles (drag chain): Max. 5 Mio (25 °C)travel (drag chain): Max. 5 m (horizontal)travel speed (drag chain): Max. 3 m/sacceleration (drag chain): Max. 5 m/s²rated surge voltage: 1.5 kVlocking of the slots: Screw thread (M12×1 mm) recommended tightening torque 0.6 Nm (self-locking) Die-cast zinc, matt nickel-platedMounting type: Plugged, screwedPollution degree: 3; Cable colour: Violet; Cable diameter: 7.7 mm; Cable length: 5.00 m; Coding: B; Connection side A (sensors/actuators): M12 plug, straight; Connection side B (sensors/actuators): M12 socket, straight; Cross-section (sensor/actuator wiring): 0.25 mm²; IP rating: IP65, IP66K, IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; Nominal current: 4 A; Nominal voltage: 300 V; Outside diameter: 7.7 mm; Thread type (wiring and installation): M12

Price: EUR 66.99

Sitemap        Listing