Murrelektronik 7000-15651-8310030 Sensor/actuator connector 030 m 1 pc(s)

Additional technical information: Design: 15651Wire number/cross-section: 4× 0.5 + 1× 4× 0.14 mm²Towing chain values: 5 Miowire insulation: PUR (bl, ws, br, sw, (wsor, or) + (wsgn, gn)Bending radius (moving): 10× Outer-ØTemperature range (moving): -40...+80 °CCable identification: 831Cable weight [g/m]: 10mm: GN, Wire insulation: 10 mm, Wire insulation: (bl), Wire insulation: 1 mm: 1 mm: 1, BL, BL, BL, BL, BL, BL, BL, BL, BL:YesChemical resistance: Good oil, petrol and chemical resistance (VDE 0472 Part 803 Test B)Thermal resistance: Flame resistant to UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2Test voltage: 1000 V ACbending radius (fixed): 5× Outer ØNumber of bending cycles (drag chain): Max. 5 Mio (25 °C)Track (drag chain): Max. 5 m (horizontal)Travel speed (drag chain): Max. 3.3 m/sAcceleration (drag chain): Max. 5 m/s²Rated surge voltage: 0.8 kVLocking of slots: M16×1.5 mmMaterial (locking): Brass, nickel-platedPollution degree: 3; Cable colour: Green; Cable diameter: 8.1 mm; Cable length: 0.30 m; Coding: Y; Connection side A (sensors/actuators): M12 plug, straight; Connection side B (sensors/actuators): Cable, open end; Cross-section (sensor/actuator wiring): 0.14 mm²; IP rating: IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -50 °C; Nominal current: 6 A; Nominal voltage: 60 V AC; Outside diameter: 8.1 mm; Sensor/actuator connectivity fittings: Rear panel fitting; Thread type (wiring and installation): M16

Price: EUR 57.99