Additional technical information: Design: 12221Core number/cross-section: 4à 0.75 mm²Drag chain values: 10 Mio.Wire insulation: PP (br, ws, bl, sw)Bending radius (moving): 10à outer-ÃTemperature range (flexible): -25...+80 °C.Cable identification 862Cable weight [g/m]: 67.10Material (conductor): Plain copper braidResistance (conductor): Max. 26 â¦/km (20 °C)Single wire à (conductor): 0.15 mmConstruction (conductor): 42à 0.15 mm (strand class 6)AWG: Similar AWG 18Material (core insulation): PPWire à incl. insulation: 1.85 mm ±5%Wire color/numbering: br, sw, bl, wsTwisted-strand network: 4 wires strandedShielding: no.Chemical resistance: Good resistance to oil, petrol and chemicals (EN 60811-404)Thermal resistance: Flame-resistant according to UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2Test voltage: 2500 V/ACBending radius (fixed): 5à outer-ÃNumber of bending cycles (drag chain): Max. 10 Mio (25 °C)Travel path (drag chain): Max. 10 m (horizontal)Travel speed (drag chain): Max. 3 m/s.Acceleration (drag chain): Max. 10 m/s²Locking the slots: Screw thread (M12Ã1 mm) recommended tightening torque 0.6 Nm, self-lockingMaterial (locking): Die-cast zinc, matt nickel-plated; Cable colour: Grey; Cable diameter: 6.5 mm; Cable length: 15.00 m; Connection side A (sensors/actuators): M12 socket, straight; Connection side B (sensors/actuators): Cable, open end; Cross-section (sensor/actuator wiring): 0.75 mm²; IP rating: IP66K, IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 6.5 mm