MTR62-230V Eltako Motor relay Flush mount
Motor isolator relay, 2+2 NO contact not isolated 4A/250V AC, for two 230V motors. No standby loss. For panel mounting. 49x51mm, 20mm deep. The terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². The MTR is a control relay for controlling one or two shutter and shutter motors with mechanical or electronic limit switches. The tubular motors of shading elements and roller shutters must not be connected directly in parallel under any circumstances, as this will result in reverse voltages and ultimately in the destruction of the motors via the limit switches. Several MTR can be connected in parallel at the inputs. They are suitable for control, for example EGS12Z, EGS61Z, FSB14, FSB61NP AND FJ62NP. Control and switching voltage 230V. Caution! The switching time between the start and stop command must be ⥠500ms, otherwise it is possible to damage the motor or the cut-off relay (technical Observe the motor data).This text is machine translated.