MONTECH KING 95 PRO Tempered Glass ARGB Midi tower PC casing Red
The Montech KING 95 PRO Midi-Tower: The ideal introduction to your gaming setupThe Midi-Tower Montech KING 95 PRO is the ideal basis for your self built gaming PC with high-end hardware. The PC housing comes with a sophisticated air cooling system ex-factory, so that you can concentrate on installing your preferred gaming hardware. At the same time it is expandable, so that you can convert it in your personal gaming setup. In addition, it also looks damn good, especially thanks to the front and the side panels made of thermal glass, which merge seamlessly together.Well cooled from the factoryThe total of six preinstalled fans provide enough air flow in the PC casing, which is supported in addition by the generous air inlets including dust filter integrated on the left side and on the cover. Two 140s ARGB PWM fans with reversed blades are installed on the side, which can be replaced by two 120 mm fans. There is space under the lid for three 120 or two 40-series fans. Another 120 mm ARGB PWM fan is pre-installed at the rear side. Three additional 120-series ARGB PWM fans with reversed blades are installed on the floor. They can be replaced by two 140 mm fans. You can contribute there to cooling the graphics card. The CPU can be equipped with a Hohem cooler up to 175 mm.Space for two power supplies and plenty of drivesFor sophisticated gaming hardware, the Montech KING 95 PRO offers plenty of space. Mainboards up to the form factor ATX supported. Graphics cards attached to them may be up to 420 mm long. Up to two power supplies can be accommodated in the second chamber behind the motherboard tray. For cable management there is a space of 35 mm. There is also a drive cage for either two HDDs or three SSDs. Two SSDs can be attached to the back of the mainboard tray. On the bottom, you can also accommodate three HDDs or SSDs instead of the fan.The side-mounted IO panel in front of the second chamber contains a USB-C port and two USB-3.0 connectors as well as a 3.5 mm socket for microphone and headphones, and a switch for controlling the lighting. The cover of the second chamber is bordered by an ARGB strip. This PRO version of the Montech KING 95 comes with a hub for controlling lighting and fan speed.This text is machine translated.