Kathrein EXR 221 SAT single cable multiswitch 2 Inputs (multiswitches): 3 (3 SAT/0 terrestrial) No of participants: 2
- Single-cable mini multi-switch for distribution of digital Sat-IF signals (including HDTV) and terrestrial signals via a cable for a twin receiver or two single receivers in a single family household- No restriction in the variety of programs - the complete program range of up to two satellites is transmitted- the single-cable mini multi-switch does not contain its own switching matrix. It is therefore connected to two free connections of a multi-switch (e.g. EXR 2908) or on two connections of a twin or quad-feed system (e.g. UAS 585)- the single-cable mini multi-switch generates the 14/18 V and 22 kHz required to control and supply the connected multi-switch or feed system as well as the DiSEqC-CTM commands, from the output voltage of the receiver- If all receivers are switched off, the single-cable mini-multi-switch does not need any current- for transponder selection, special tuner components, so-called SCR (Satellite Channel Router), are integrated in the single-cable mini multi-switch for conversion to the subscriber frequencies- Each receiver is assigned a fixed subscriber frequency (a twin receiver requires two subscriber frequencies)- Corresponds to the SCR single-cable standard in accordance with EN 50494, i.e. the connected receivers must also comply with this standard- the reception of the terrestrial range 5-862 MHz via input A is also possible when the satellite receiver is switched off- for operating a feed system with more than 80 mA or multi-switches with more than 2 x 40 mA current consumption, the connection of the mains adapter NCF 18 (not included in the delivery) is necessary at the socket marked DC- suitable for indoor mountingThis text is machine translated.