Kathrein EXD 154 SAT multiswitch
Universal multi-switch with automatic operating recognition. A standard TV or 16 receivers can be operated at each connection in single-cable mode.; All signaling types are supported and automatically recognized: 14/18 V, 0/22 kHz (Legacy), DiSEqC 1.0, one-cable standards according to EN 50494, as well as the extended command set according to EN 50607 (SCD2 or also JESS); additionally, the use of PIN codes in single-cable operation is possible. Latest IC technology with full-band capturing provides for best signal quality. The inputs are broadband and can also be operated with wideband LNB (e.g. UAS 582). Thus, a multi-feed system can be implemented; (for two LNB the TV must support either DiSEqC or the one-cable standard). ; The integrated AGC (Automatic Gain Control) provides a constant output level of the Sat-ZF signals and thus for more reserve in the distribution.; If all TV/receiver are switched off, the multi-switch no longer consumes any power. If Kathrein power saving is activated, zusaÌtzlich the LNB or the LNB is switched off. ; The integrated power supply for supplying the LNB is highly efficient and short-circuit proof.; Wideband to Quatro Mode: Here, the two inputs of the wideband LNB are permanently converted to the four outputs of the multi-switch. The outputs of the EXD 154 behave like a Quatro LNB, so that another standard multi-switch can be connected. ; For indoor mounting ; ; This text is machine translated.