Jumo 00562984 pH electrode 1 pc(s)
This conductive conductivity sensor has a cell constant of K=0.01 (for measuring ranges 0.05 to 10 US/cm or 0.1 to 20 MOhm/cm) as well as a measuring insert Pt1000 in two-wire circuit. The installation takes place via the PEKA process connection adapter with EHEDG certification, which is made of stainless steel (1.4435). An M12 plug is available as an electrical connection. The material of the electrode is stainless steel (1.4435). Installed length 70 mm. The operating temperature is 0 to +135 °C in the normal operation and up to +150 °C for max. 45 min. During sterilization. The maximum pressure load is 9 bar at 25 °C and 15 bar at 150 °C (max. 45 min.). This version is a so-called pharmaceutical version with an acceptance test certificate n. EN 10204 3.1 for material and roughness, roughness of the medium-contact parts small 0.8 my, with ASTM-certificate and welded in foil. CAUTION: These measuring cells can only be used with an optional PEKA adapter.This text is machine translated.