Impulse changeover switch DIN rail Eltako ESR12DDX-UC 2 makers 230 V 8 A 2000 W 1 pc(s)
Digitally adjustable multi-function impulse switching relay. Standby loss only 0.03 to 0.4 watts. To do this, simply connect the N conductor to the clamp (N) and L to 1(L) and/or 3(L). This results in an additional standby loss of only 0.1 watt. Universal control voltage 8..230V UC. Supply voltage as the control voltage. The functions are entered in accordance with the operating instructions with the MODE and SET keys and displayed digitally on an LC display, if necessary also locked. The accumulated switch-on time is continuously displayed. By using bistable relays, there is no coil power loss or heating thereby even when the relay is switched on. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. Only for the surge current switch functions: If the supply voltage fails, it is switched off according to the setting defined or the switching position is retained (then + in the display next to the function abbreviation).This text is machine translated.