Icarsoft LR V30 OBD II diagnostics tool iclrv3 Compatible with: Land Rover Jaguar
Icarsoft LR V3.0 is a professional and powerful vehicle fault diagnosis tool for land Rover/Jaguar developed by Icarsoft Technology Inc. With a 10 cm / 4.0 TFT LCD display and unique diagnostic software, it offers complete control unit diagnostics for individual vehicle brands and test modes, which mainly include: CANBUS, ISO9141, KWP2000 and J1850, etc. It enables technicians to accurately diagnose complex problems.Properties⢠Diagnosis of individual brands of most models (OBDII-16DLC)⢠Steering Angle Sensor (SAS) Calibration⢠Full system diagnostics⢠ABS bleeding (BLD) (some vehicles do not have this function)⢠Auto-ident technology⢠lninjector Coding (INJ) (some vehicles do not enjoy this function)⢠Actuation test / Bi-directory test⢠Read and clear DTC⢠supports Freeze Frame from Fault Code functions⢠Read live data⢠supports oil service reset⢠supports battery test⢠Electronic Park Brake System (EPB) Maintenance⢠supports data validation and printing⢠Battery Management System (BMS) (some vehicles do not have this function)⢠Fast upgrade from your computer⢠Diesel Particulate Filter (DPF) Regeneration Control System (some vehicles do not enjoy this function)⢠10 cm / 4.0 TFT-LCD, 480*320 pixels⢠Electronic throttle control system (ETC)⢠supports multilingualismPerformance specifications1. Icarsoft LR V3.0 can read and clear the error codes of most systems, such as engine, transmission, ABS and airbag, etc.2. Support OBDII/EOBD ten modes of operation.3. Read live data.4. Full ECU diagnostics.5. Applies to the single brand of most models equipped with OBDil-16 DLC.6. Easy to use with silicone key.7. Auto VIN technology can automatically identify model and year information in the shortest time.8. Actuate Test/Bidirectory Test is used to access vehicle-specific subsystem and component tests.9. Support Freeze frame of error code functions.10. Oil Lamp/Service Reset: Supports resetting the service lamp.11. Electronic Park Brake System (EPB) Maintenance: Disables and reactivates the EPB system for replacement and initialization.12. Battery Management System (BMS): Registers the new battery in the BMS during battery replacement.13. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process if the DPF is blocked, and turns off the DPF indicator.14. Electronic Throttle Control System (ETC) detects the throttle control value when the throttle is cleaned or replaced.15. Calibration of the steering angle sensor (SAS), calibrates the steering wheel for straight-ahead driving or recalibrates the SAS when replacing steering parts.16. ABS bleed, deflates air to restore ABS brake sensitivity, or relearns when ABS is replaced.17. Injector coding, relearns injector control parameters while replacing or replacing the injector.18. BCM (Body Stability), this feature supports routine maintenance of DSC modules, such as resetting or deleting customization values and starting the device.19. ECM (Engine), this feature supports routine maintenance of engine modules, for example Reset or clear the adjustment values, calculate the fuel consumption.20. TCM (transmission adaptation), this function supports routine maintenance of the transmission modules, e.g. Resetting the adjustment values, adjusting the oil level.21. Engine idle, this correction can be made when the idle speed fault is corrected. Set the engine speed of the vehicle at idle speed.22. Air suspension, reset electronic air suspension with the message system, close all doors, go through the suspension reset message system or switch off.23. TPMS service feature include displaying sensor IDs from the vehicle ECU, entering TPMS sensor replacement LDS and testing sensors.24. ACS (Air Conditioner), this feature supports routine maintenance of the Air Conditioning Modules, for example, Air Conditioning Adjustment Reset, Air Conditioning Compressor Reset, Air Conditioning Compressor Run, Stepper Motor Initialization.25. The Headlights function is used to service the headlights and other related operations (including AFS adjustment) and then calibrate them.26. After repair or replacement of the seat position drive motor, the calibration functions must be performed.27. THE, after repair or replacement of the electric window motor, must be performed with the appropriate calibration functions.28. The Print Data feature allows you to print diagnostic data recorded by the scanning tool or user-defined test reports.29. Battery test allows you to check the voltage of the battery with OBD port through the scan tool when the engine starts.30. DTC library for reference when the user is running this device.31. Update via computer.32. Multilingual: English, German, Dutch, Spanish, French and more.Note!Certain functions may be restricted by the vehicle manufacturer because a special factory code is required.This scan tool covers more than 20 model years, so some features may not be available for all years/models