ID 479055446 SenSafe ITS-EZ-02 eXact Micro 7+ Electronic Water Tester Photometer
eXact Micro 7+ Photometer for Water Testing is using a patented method and technologies that offer faster, safer, easier, and more precise results. Offers over 10 direct reads for water contaminants such as: Total Alkalinity, Bromine, Calcium Hardness, Free Chlorine, Total Chlorine, High Chlorine, Total Iron, Copper, Ozone, Permanganate and pH - which allows for testing of additional 20 contaminants, total of 40 parameters. Exact Micro 7+ Standard Kit Includes 25 tests of each: 1) eXact Strip Micro 0.01 - 6.0 ppm (mg/L) DPD-1 (Free Chlorine) 2) eXact Strip Micro 0.01 - 6.0 ppm (mg/L) DPD-3 (Total Chlorine) 3) eXact Strip Micro pH- 6.2 - 8.4 4) eXact Strip Micro 20 - 990 ppm (mg/L) Calcium Hardness 5) eXact Strip Micro 20 - 180 Total Alkalinity 6) eXact Strip Micro 0.04 - 8.0 ppm (mg/L) Copper How to Use eXact Micro 7+ Electronic Meter: 1. Turn the meter on and select an appropriate test by pressing MENU button. 2. Remove a test strip for chosen test from the bottle. Don't forget to recap the bottle immediately. 3. Rinse the CELL, which is located in the top of the meter, at least 3 times with water to remove residue and prevent cross-contamination. Finally, fill it with 4 ml of water sample. 4. Zero meter - press ZERO button untill 0.00 ppm is displayed. Sample is ready for testing. 5. Dip strip into a water sample in a CELL, and immediately press READ button to start reading. This will start a 20 second countdown. Move strip back and forth in water sample. Remove and discard when timers shows 1. 6. Read the results. Over 7 Direct read parameters (Total Alkalinity, Bromine, Calcium Hardness, Free Chlorine, Total Chlorine, Copper, Ozone, Permanganate, and pH) Patented technology (for use in accordance with U.S. Patent No. 7,333,194). * 0.01 ppm (mg/L) precision. * Built-in, permanent cell (no loose glass or plastic cells; simply fill or dip into water). * Automatic countdown timer. * 140 test memory (saves last 20 tests per menu). * Incorporates eXact Strip technology (safe & reliable reagent dispersion). * No-slip grip housing. * Lightweight (weighs only 6 oz with batteries installed). * Waterproof meter (IP-67) and floats. * Easy-to-read LCD display. * Uses 525 nm vawelength. The water test is environmentally friendly - it has recyclable parts and uses 60% less reagents than 10mL sample tests. Proprietary optics allow for accurate testing with or without cap (which is available). This Electronic Meter is capable of performing tests for 25 parameters (with use of test-specific reagent and conversion chart): Ammonia, Bromine, Chloride/Salt, Chlorine Dioxide, Chromium Hexavalent, Copper, Cyanuric Acid, Fluoride Iodine, Iron, Low Range Total Hardness, Manganese, Nitrate, Nitrite, Ozone (DPD-4), Acid pH, Alkali pH, Potassium, Sulfate, Sulfide, and Turbidity. The eXact Micro 7+ Water Tester is ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution. CE certification, US EPA Compliant meter for Free & Total Chlorine.