ID 1190373695 SUEZ AG-90 4" x 40" High Rejection 2300 GPD Replacement Reverse Osmosis Membrane - Tap/Brackish Water
The A-Series family of proprietary thin-film reverse osmosis membrane is characterized by high flux and high sodium chloride rejection. AG HR brackish water elements are selected when high rejection and operating pressures as low as 200 psi (1,379 kPa) are desired. These elements are recommended for brackish water with salt concentration (TDS) levels between 1,000 and 10,000mg/l or when very high salt rejection of monovalent ions is required.Element SpecificationsModelFlowActive AreaAvg. RejectionMin. RejectionPart NumberAG-902,400 GPD85 ft299.8%99.3%3056665Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.Operating and Design ParametersMembrane: Thin Film Membrane (TFM®)Typical Operating Pressure: 200 psigMaximum Pressure: 450 psigMaximum Temperature: 122°FChlorine Tolerance: 1,000 ppm-hrs, dechlorination recommendedOptimum Rejection pH: 7.0 -7.5Operating pH Range: 4.0 - 11.0Cleaning pH Range: 2.0 - 11.5Maximum Pressure Drop: 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU: