FZS65-wg Eltako Wireless Pull switch Surface-mount Max range (open field) 30 m
Radio pull switch for surface mounting 84x84x24mm or for mounting in the E-Design65 switch system. With silver and red handle. Generates the energy for radio telegrams, therefore without connecting cable and no standby loss. Smart home sensor When pulling and releasing the handle, one radio telegram is transmitted into the Eltako building radio. Included in the delivery are the completely mounted pull switch, a silver grip, a red grip and two screws with dowels. Mounting by screwing: First disassemble the fully fitted pull switch. To do so remove the screw, disconnect the cover and remove the intermediate frame including the rocker and the transmitter module by loosening the retaining brackets above and below. Fix the holding plate by screwing it on. Frame with mounting cutouts on top with the intermediate frame including transmitter module and rocker, with the rear marking 0 upwards, click into place. Hook the cover into the upper mounting cut-outs of the frame with the string applied and screw it into the mounting plate at the bottom with the screw. Shorten the string to the desired length, push through the red or silver handle and secure with a double knot. Position-independent: The pull switch works in any position, even when fixed to the ceiling. Suitable actuators: The wireless pull switch sends the same radio telegrams as a radio switch during operation and can therefore be programmed into actuators and the GFVS software as this one. If it is programmed as an emergency switch in an actuator as a central ON, then an emergency call can only be acknowledged centrally via another programmed button. The radio module included in the radio pull switch can be taught-in in encryption to all actors of the series 61, 62 and 71 as well as in the FAM14. To do this, the FTVW wireless encryption rocker is required. Encrypted actuators carry the key pictogram If necessary, please order a 2-way R2E frame, 3-way R3E frame or 4-way R4E frame with mounting cutouts above.This text is machine translated.