FSVA-230V-10A Eltako Actuator
1 closing contact not floating 10A/250V AC, incandescent bulbs 2000 Watt, LED and ESL up to 400 Watt. With integrated current measurement up to 10A. Encrypted radio, bi-directional radio and repeater function can be connected. Standby loss of only 0.8 watt. Adapter for German earthing contact socket-outlet. With increased protection against accidental contact. Supply and switching voltage 230V. The switching status is maintained with supply voltage failure. A defined cut-off is performed when the supply voltage is restored. After plugging in the device, wait for the automatic short synchronization before plugging in the switched device. This radio actuator features the most modern hybrid technology developed by us: We have combined wear-free reception and evaluation electronics with a bi-stable relay. With the integrated current measurement, the apparent power from about 10VA to 2300VA is measured with the contact closed. A radio telegram is sent to the Eltako building radio within 30 seconds after switching on the load and after a change in the power by at least 5% and cyclically every 10 minutes. Evaluation at the computer with the building radio visualization and control software GFVS. GFVS Energy supports up to 100 electric meters, GFVS 4.0 up to 250 electric meters. Encrypted sensors can be taught in. Bidirectional radio and/or a repeater function can be switched on. Each status change as well as received central control telegrams are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. With the left button LRN up to 35 radio buttons are assigned, either as universal button, direction button or central control button. For controlling cooker hoods or similar up to 35 radio-window door contacts FTK or window grip sensor FFG7B-RW can be taught. Several FTK or window handle sensors FFG7B-RW are linked together. If an FTK or window handle sensor FFG7B-RW is taught in, control commands from possibly taught-in buttons are no longer executed. The right button can be used to switch the device on and off manually. The LED accompanies the programming process according to the operating instructions and indicates radio control commands during operation by a short flash.This text is machine translated.