FSUD-230V Eltako Socket Dimmer
Universal dimming switch, Power MOSFET to 300W. Automatic lamp detection. Standby loss of only 0.7 watt. Adjustable minimum brightness. With kid's room and snooze circuit. Encrypted radio, bi-directional radio and repeater function can be connected. Adapter for German earthing contact socket-outlet. With increased protection against accidental contact. Universal dimming switch for lamps up to 300W. Dimmable 230 V-LED lamps and dimmable energy saving lamps ESL depending on the lamp electronics. Switching at zero point with soft on and soft off for saving lamp. No minimum load required. This dimmer switch is activated using the FT and FFT radio buttons, the FHS and FMH radio hand-held transmitters as well as the FF8 and UFB remote controls. The brightness set remains saved when switched off (MEMORY), however, it can be switched off for ESL lamps. In the event of a power failure, the switch position and the brightness level are saved and, if necessary, switched on when the supply voltage is restored. Automatic electronic overload protection and overheating shut-off. Encrypted sensors can be taught in. Bidirectional radio and/or a repeater function can be switched on. Each status change as well as received central control telegrams are then confirmed with a radio telegram. This radio telegram can be taught in the GFVS 3.0 software. The GFVS software also shows the current dimming value in %. With the left button LRN up to 35 radio buttons are assigned, either as universal button, direction button or central control button. The right button can be used to switch the device on and off manually. The buttons can be taught in either as direction button or as universal button: Switch on and dim on one side as the direction button and switch off and dim off on the other side. Double-click on the switch-on page triggers the automatic dimming up to full brightness. The snooze function is activated by a double click on the switch-off side. The children's room service is performed on the switch-on side. The direction reversal is done as universal button by briefly letting go of the button. Kids room connection and snooze circuit according to user manual. The LED accompanies the programming process according to the operating instructions and indicates radio control commands during operation by a short flash.This text is machine translated.