FSS12-12V DC Eltako Wireless Electricity meter
Wireless electricity meter transmitter module for connection to the S0 interface of many AC meters and three-phase meters. Stand-by loss only 0.5 watt. With load shedding relay 1 NO, potential-free 4A/250V and with interchangeable antenna. If required, a FA250 wireless antenna can be connected. DIN rail mounting device for mounting on a mounting rail, 2 division units = 36 mm wide, 58 mm deep. The electric meter-transmitter module FSS12 evaluates the signals of the S0-interface of an electric meter and sends radio telegrams with the consumption and the counter status in the Eltako-building radio for evaluation at the computer with the visualization and control software GFVS 4.0 and GFVS-Energy. In the case of three-phase meters, the information on high tariff HT or Low-cost NT if the E1/E2 terminals of a three-phase meter are connected to E1/E2 of the FSS12. From production week 42/2012 onwards, with an additional freely selectable pulse rate. GFVS-Energy supports up to 100 transmission modules, GFVS 3.0 supports up to 250 transmission modules. The 12V DC power supply is effected with a single 1 division unit wide switching power supply SNT12-230V/12V DC-1A. If the relay of the FSS12 is switched on, 0.6 watts are required. The setup and display display is divided into 3 fields.This text is machine translated.