FSR61/8-24V UC Eltako Wireless Actuator Flush mount Switching capacity (max) 2000 W Max range (open field) 30 m
Radio actuator surge current relay. 1 normally open contact potential-free 10A/250V AC, incandescent lamps 2000 Watt, off-delay with switch-off warning and button-continuous light can be switched on. Encrypted radio, bi-directional radio and repeater function can be activated. Stand-by loss only 0.3-0.8 watts. For panel mounting. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is retained. With recurring supply voltage is switched off in a defined way. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. In addition to the radio control input via an internal antenna, this radio actuator can also be locally controlled with a conventional control button that may be installed in front of it. A glow lamp current is not permitted. Encrypted sensors can be taught in. Bidirectional radio and/or a repeater function can be switched on. Each change in status and received central control message frames are then confirmed with a radio message frame. This radio telegram can be taught in to other actuators such as FSR61NP-230V, the GFVS software and in universal displays.This text is machine translated.