FSM60B Eltako Transmitter Max range (open field) 30 m
Radio transmitter module with battery and antenna rod. LxWxH: 60x46x30mm (dimensions without antenna and screw connection). This wireless transmitter module can be operated by a water sensor FWS60 or by a sensor and transmits various adjustable radio telegrams in the Eltako-building radio. With an inner jumper, one can select from 4 operating modes. In operating mode 1 (jumper plugged into position JP1), radio telegrams are transmitted as if a double-rocker switch is pressed in the lower left corner of a wireless switch. In operating mode 2 (jumper plugged into position 2), radio frames such as double rocker on the top right and bottom right of a radio button are sent. In operating mode 3 (jumper set to position 3, factory setting), radio telegrams are sent according to EnOcean standard EEP A5-30-03. In operating mode 4 (jumper plugged to position 4), radio telegrams are sent according to EnOcean standard EEP A5-30-01. In operating modes 3 and 4, a status message frame is also sent every 33 minutes. The power supply for several years is provided by an internal 3V button cell CR2032, the battery charge status is transmitted in every data and status message frame in operating mode 4. The internal LRN button is pressed to program into an actuator ready for learning. To remove the cover, loosen the two screws on the front and make sure the seal is in the correct position when closing. For the cable connection, there is a screw connection M12 on the bottom. You may not control several wireless transmitter modules at the same time.This text is machine translated.