FMSR14 Eltako RS485 Actuator DIN rail
Multi-function sensor relay with display and 5 channels (brightness, twilight, wind, rain and frost) for the Eltako RS485 bus. Stand-by loss only 0.1 watt. Series installation device for mounting on mounting rail. Connection to the Eltako-RS485 bus, cross-wiring bus and power supply with jumper. This multi-function sensor relay evaluates the radio telegrams of the radio weather data transmission module FWS61 and, depending on the setting via the display, issues corresponding switching commands directly to the RS485 bus and additionally to the radio network with the buttons MODE and SET. This allows remote-installed radio actuators to be controlled. If only centrally installed actuators for controlling shading elements are to be addressed by the FWS61, it is sufficient to learn into these actuators FSB14 with the help of the PC tool PCT14. A FMSR14 is then not required. For the function of the sensor relay FMSR14, a device address must be assigned by the radio AntennenÂmodul FAM14 as described in the operating instructions.This text is machine translated.