FESTO Mini slider 8083803 EGSS-BS-KF-32-75-8P-ST-M-H1-PLK-AA 3 A
Additional technical information: Protection class: IP40Ambient temperature: 0 °C - +50 °CProduct weight: 1,150 gMaterial casing: Aluminum wrought alloy, anodizedLED displayStorage temperature: -20 °C to +60 °C.Relative humidity: 0 - 90 %Approval: RCM MarkFastening method: With internal thread, with centering sleeve, with cylindrical pin, with accessoriesNote on ambient temperature: Above the ambient temperature of 30 °C, a power reduction of 2 % per K must be observed.All mounting positions permittedCorrosion resistance class KBK: 0 - no corrosion stressVibration resistance: Transport application test with sharpening degree 1 according to FN 942017-4 and EN 60068-2-6Shock resistance: Shock test with sharpness 1 according to FN 942017-5 and EN 60068-2-27Rotor position sensor: Encoder absolutely single turnRotor position sensor measuring principle: MagneticRotor position sensor resolution: 16 bitsProtection class IIIPermissible voltage fluctuations: +/- 15 %Number of digital logic inputs: 2Switching logic inputs: PNP (positive switching)Properties of logic input: Configurable, not electrically isolatedSpecification of logic input: In accordance with IEC 61131-2, type 1Operating range logic input 24 VNumber of digital logic outputs 24 V DC: 2Switching logic outputs: PNP (positive switching)Properties of digital logic outputs: Configurable, not electrically isolatedMax current digital logic outputs: 100 mASize: 32Design: Mini electric slide, with ball screw drive, with integrated driveRepeat accuracy ±0.015 mmPosition detection: Motor encoder, for proximity switchesDuty cycle: 1Power supply, connection type: PlugPower supply, connection method: M12x1, T-coded according to EN 61076-2-111Power supply, number of poles/wires: 4Logic interface, connection type: PlugLogic interface, connection technology: M12x1, A-coded according to EN 61076-2-101Logic interface, number of poles/cores: 8Logic interface, connection diagram: 992264Max. Cable length: 15 m outputs, 15 m inputs, 20 m with IO-Link operationMax current consumption: 3 AIO-Link, SIO mode Support: YesIO-Link, protocol: Device V 1.1IO-Link, communication mode: COM3 (230.4 kBaud)IO-Link, port type: A.IO-Link, number of ports: 1IO-Link, process data width OUT: 2 bytesIO-Link, process data content OUT: 1 bit (Move in), 1 bit (Move out), 1 bit (Quit Error)IO-Link, process data width IN: 2 bytesIO-Link, process data content IN: 1 bit (state device), 1 bit (state move), 1 bit (state in), 1 bit (state out)IO-Link, service data content IN: 32 bit force, 32 bit position, 32 bit speedIO-Link, minimum cycle time: 1 msIO-Link, data storage required: 0.5 kilobytesIO-Link, connection pin: PlugParameterization interface: IO-Link, user interfaceInsulation protection class: BMotor type: Stepper motorReferencing: Fixed stop block positive, fixed stop block negative, reference switchAdditional functions: User interface, integrated end position detectionOperational readiness display: LEDKC-MARK: KC-EMCWorking stroke 75 mm.Guide: Ball circulation guideMax. Acceleration 5 m/s2Max. speed 0.19 m/sMax. Force Fy: 991 N.Max. Force Fz: 991 N.Max. Feed force Fx 60 N.Guide value payload, horizontal: 2 kgFeed constant 8 mm/revGuide value mileage: 5,000 km.Moving mass surcharge per 10 mm stroke: 12 g.Slide material: Aluminum wrought alloy, anodizedHubreserve: 0 mmReversing clearance 150 µmSpindle diameter 8 mmSpindle pitch 8 mm/revSpindle type: Ball screw driveDynamic load capacity fixed bearing: 3.795 N.Dynamic linear guide load rating: 2.135 N.Dynamic load rating Ball screw drive: 2.000 N.Max. Torque MX 3.4 NmMax. Torque My: 3.17 NmMax. Torque MZ: 3.17 NmMax. Radial force on drive shaft: 140 N.Guide value payload, vertical: 2 kgStatic load rating Ball screw drive: 3,700 N.Static load rating linear guide: 3.880 N.Static load rating for fixed bearings: 1,792 N.Maintenance interval: Life lubricationMoving mass at 0 mm stroke: 149 gWeight surcharge per 10 mm stroke: 30 g.Basic weight at 0 mm stroke: 924 gSlide guide material: Roller bearing steelGuide rail material: Roller bearing steelMaterial Joch plate: Aluminum wrought alloy, anodizedPiston rod material: High-alloy steel, stainlessSpindle nut material: Roller bearing steelSpindle material: Roller bearing steel; Nominal current: 3 A; Nominal voltage: 24 V